LED High Bay Light for Workshop

Application

Environment :Working temperature -15C~+40C
Humidity ≤50%
Lifetime:More than 3 years
Replace:Can directly replace lights with other sources,
Such as Incandescent lamp,Energy-saving lamp,
Promise lamp,Mercury lamp,Sodium lamp.
Such as compare with energy-saving light source
In the same angle :80W is same as 200W,
100W same as 250W, 120W same as 300W.
Site:Indoor workshop

Outline

Structure:
Reflection Cup:Spinning with 1070 aluminum plate with 1.5mm
Sunflower Radiator:6063-T5 extrusion section,turning technology.
Power Supply Box:Die-casting aluminum, octangle.
Light Source Holder:Injection molding with porcelain PC of 94V0
Fireproof level.
Hemispherical Lampshade:Injection molding with milky PC                                                               materials.
Chip:International or  domestic famous COB 80W/100W120W.
Power Supply:Isolation output
Protection:IP40
The EMC and HI-pot:EN60598-2008

Power Supply Parameter

Input Voltage	90-260V   AC 50/60Hz
Efficiency	More than 90%
Output Currency	300mA
Harmonic Wave	Less than 15%

Feathers

..Using high power LED light source, higher luminous efficiency,
More energy saving.
..Hemispherical emulsification lampshade spread light firstly, soft        light too,then reflection cup distributes the light secondary.
..Four combined COB chips will lower the cost more.
..Fix the light source on the bottom of reflection cup,effectively use      the reflective cup as a radiator,lower the cost,reduce the volume
And weight of the radiator too.