New 3W3 LED Spotlight

Main Features:

1. More than 80% energy-saving than traditional lamp
2. No flickering
3. No RF interference
4. No UV radiation
5. Proprietary design for excellent thermal management
6. Surface mounted, easy installation and maintenance free
7. Super high bright and low lumen attenuation
8. The light has a fashionable and attractive out-looking, which widely use in garden, fountain or indoor use
9. IP68 for waterproof use
10. CE & RoHS compliable.

Instruction:

1. To pretect the shell, please do not wipe the light with rough and erosive cleanser, or do not rinse it with high pressure water
2. Keep the light away from the dissolving chemicals to avoid the light shell being destroied
3. Should use within -25-50d
4. Please do not use the light if it is mangle or has insulated problem
5. This light should be installed or repaired by professional person
6. Please contact us for detailed information if have further question

Solution for common fault

1. If the light can not light on, please check whether the power or switch on
2. If the light is on or off continously, please check whether the power supply is loose or not touch well, whether the light's connection is well
NOTE: If all above points can not make the light work regularly, please contact with profession person.

Typical Application:

1. This light could be used in garden, fountain, underwater or indoor use etc.


Maintenence Guide:

1. Please make sure that the electrical source hsa been cut off before maintennce;
2. The glass better to be cleaned regularly to keep good light transmittance;
3. Periodically clean dust on the outer housing and the heat sink for good lighting condition;
4. Do not use water or other corrosive liquid to clean it up, better use the dry duster cloth;
5. When it needs to replace for a new LED driver, it just needs to use the screwdriver yo take it off, very easy and convenient.
6. The most important is that do not mix the wires up, make sure the wiring is right.