10W 12V LED Underwater Light (KF1008H)

POOL UNDERWATER LIGHT
Underwater light, pool light, LED pool light

BASIC DATA
Power: 10W 12V;
Light dia: 290mm;
Thickness: 235mm;
Light color: Can be changed;
Material: Stainless steel and plastic;
Shell color: Silver;
Package: 6 in a carton;
Installed: Hung on the pool wall;
Item Type: Pool Lights
Emitting Color: Color change
Light Source: Incandescent Bulbs
Certification: CE
Color Temperature(CCT): Pure White
Waterproof Standard: IP68
Lamp Body Material: Stainless steel
Input Voltage(V): 12V
Lamp Power(W): 10W
Working Temperature: 0 - 40
Brand Name: Kingford
Place of Origin: Guangdong, China (Mainland)
Model NumberKF1008H
Emitting Color: Auto color
Dia: 290mm
Shape: Round
Frequency: 50Hz
Lens material: PC
Light accessories: Transformer (Optional)
Lamp housing: Stainless steel
MOQ: 100 PCS
Application: Swimming Pool underwater light

WORK ACCESSORIES
Underwater light transformer
We have:
100/200/300/800~2500 waterproof and ordinary type transformer;

INSTALLATION INSTRUCTION
1. Light should be set 30-40cm below the water level;
2. The outlet for the conduit should be positioned so as not to interfere with the mounting ring in any way.
3. Set conduit in wall before concrete is sprayed.
4. Render or Marblesheen mounting ring into wall;
5. Ensure that the outer face of mounting ring is flush with the finished pebble surface;
6. Transformer needs to be installed in an easily accessible area to allow for servicing when requiry.

REPAIR
1. Repair of under water lights, disconnect the main switch or circuit switch and the source of underwater light switch;
2. Loosen the screws, which is located in the upper part of the underwater lights, and then tilt the top of the light from the bottom of the lift light from the lamp housing, the spare cable around the back of release from the lamp.
3. The lamp face down on the pool side, careful not to scratch the lens.
4. Remove the light from the lamp housing on the back pad;
5. Removed with a Phillips screwdriver to the back of the screw;
6. The lamp upside down, holding the lamp glass, plastic and shade seals;
7. Replace the lamp;

ATTENTION
1. When you install the pool may not use the old lamp shade seals to replace the authentic seal;
2. Install chimney seals, lamp and plastic outer ring, put the words TOP lampshade on top;
3. Installation of lights in the back of the lamp shell liner;

OUR DELIVER TIME
3-5 working days if we have store;
7-10 working days if your order is large;
All goes according to the practice situation;

PAYMENT TIME
30% in advance, 70% balance should be paid before delivery
Discount: Offer based on order quantities