There is now a new process under development to create ultrathin, ultrasmall inorganic light-emitting diodes (LEDs) and assembling them into large arrays, which offers new classes of lighting and display systems with interesting properties.
Applications for the arrays, which you can print onto flat or flexible substrates ranging from glass to plastic and rubber, include general illumination, high-resolution home theater displays, wearable health monitors, and biomedical imaging devices.
“Our goal is to marry some of the advantages of inorganic LED technology with the scalability, ease of processing, and resolution of organic LEDs,” said John Rogers, the Flory-Founder chair professor of Materials Science and Engineering at the University of Illinois.
Compared to organic LEDs, inorganic LEDs are brighter, more robust, and longer-lived. Organic LEDs, however, are attractive because you can form them on flexible substrates, in dense, interconnected arrays. The researchers’ new technology combines features of both.
“By printing large arrays of ultrathin, ultrasmall inorganic LEDs and interconnecting them using thin-film processing, we can create general lighting and high-resolution display systems that otherwise could not be built with the conventional ways that inorganic LEDs are made, manipulated, and assembled,” Rogers said.
To overcome requirements on device size and thickness associated with conventional wafer dicing, packaging, and wire bonding methods, researchers developed epitaxial growth techniques for creating LEDs with sizes up to 100 times smaller than usual. They also developed printing processes for assembling these devices into arrays on stiff, flexible, and stretchable substrates.
As part of the growth process, a sacrificial layer of material embeds beneath the LEDs. When fabrication is complete, a wet chemical etchent removes this layer, leaving the LEDs undercut from the wafer but still tethered at anchor points.
To create an array, a rubber stamp contacts the wafer surface at selected points, lifts off the LEDs at those points, and transfers them to the desired substrate.
“The stamping process provides a much faster alternative to the standard robotic ‘pick and place’ process that manipulates inorganic LEDs one at a time,” Rogers said. “The new approach can lift large numbers of small, thin LEDs from the wafer in one step, and then print them onto a substrate in another step.”
By shifting position and repeating the stamping process, LEDs can transfer to other locations on the same substrate. In this fashion, you can create large light panels and displays from small LEDs made in dense arrays on a single, comparatively small wafer. And, because the LEDs can be placed far apart and still provide sufficient light output, the panels and displays can be nearly transparent. The thin device geometries allow the use of thin-film processing methods, rather than wire bonding, for interconnects.
In addition to solid-state lighting, instrument panels, and display systems, the new method also allows for flexible and even stretchable sheets of printed LEDs, with potential use in the health-care industry.
“Wrapping a stretchable sheet of tiny LEDs around the human body offers interesting opportunities in biomedicine and biotechnology,” Rogers said, “including applications in health monitoring, diagnostics, and imaging.”